• 公司相册
  • 公司形象
  • 公司活动
  • 产品发货
  • 产品包装
  • 客户来访
  • 车间生产现场
  • 施工安装现场
  • 海外市场
  • 新闻中心
  • 联系我们
  • 咨询留言
  • 高温万博体育max网页版注册
    高温平衡器

    K901P---S  高温平衡器

    HIGH TEMPERATURE balancer

    高温平衡器适用于建材、矿山、电力、玻璃、轻工等行业的锅炉、窑炉、高炉的余热二次利用及烟气、废气治理等各种热风管道中,是平衡调节或截断高温气体的理想设备。

    The valve is widely used in building material, mining, power, glass, light industries etc. It is applied in hot windpipe system of smoke, waste gas management and in boiler, stove, and blast furnace of recycles heat. It is the ideal equipment to evenly adjust or cut down high temperature gas. 

     

    结构特点:

    Structure characteristic:

    高温平衡器采用优质钢材焊接,内衬热强钢及双层保温耐火材料层。具有耐高温、耐磨损、刚性强、流阻损失小、热损失小、保温效率高、操作灵活、指示方位明确、维护方便、使用寿命长等优点。

    驱动装置不受任何形式的控制,可以随客户的需要安装。驱动形式可以分为卷扬机提升(开关信号),电动执行机构提升(4~20mA电流信号)。

    The valve is welded in fine steel, having heat-resistant steel lining and double layers keeping temperature lining made in fire material. It is resistant to the ultra-high temperature, high in strength. It also has the features of endurance, little in the lost of the thermal energy and flow resistance, efficient in saving thermal energy, handy to operate, definite direction, easy to maintenance and long life.

    The driving device is not controlled and can be installed according to the demand of user. Driving types are windlass elevating (open and close signal) and electric actuator elevating (420mA current signal).

     

    性能参数:

    Performance parameter:

    工作压力

    Working pressure

    适用温度

    Suitable temperature

    适用介质

    Suitable medium

    0.1MPa

    1200

    烟气、空气、粉尘气体等高温气体

    Smoke, air, gas with powder, high temperature gas etc

     

    执行机构参数:

    Actuator parameter:

    规格

    Type

    2000~2200

    2400~2800

    2900~3400

    3500~3800

    卷扬机

    Windlass

    2T

    P0.8KW

    3T

    P1.1KW

    5T

    P2.2KW

    7T

    P3.0KW

    电动执行器

    Electric actuator

    HQ2000-0.5

    P2.2KW

    HQ4000-0.25

    P2.2KW

    HQ800-0.5

    P5.5KW

    K901P---S外形连接尺寸

    Main appearance joint dimension

    DN

    A

    L

    L1

    L2

    L3

    B

    H

    H1

    H2

    2000

    2320

    2550

    2300

    300

    1350

    600

    6570

    1410

    250

    2100

    2420

    2650

    2400

    300

    1400

    600

    6770

    1460

    250

    2200

    2520

    2750

    2500

    300

    1450

    600

    6970

    1510

    250

    2300

    2620

    2850

    2600

    300

    1500

    600

    7170

    1560

    250

    2400

    2720

    2950

    2700

    300

    1550

    600

    7370

    1610

    250

    2500

    2820

    3050

    2800

    300

    1600

    600

    7570

    1660

    250

    2600

    2920

    3150

    2900

    300

    1650

    600

    7770

    1710

    250

    2700

    3020

    3250

    3000

    300

    1700

    600

    7970

    1760

    250

    2800

    3120

    3350

    3100

    300

    1750

    600

    8170

    1810

    250

    2900

    3220

    3450

    3200

    300

    1800

    600

    8370

    1860

    250

    3000

    3400

    3650

    3380

    500

    1900

    800

    9050

    2050

    350

    3100

    3500

    3750

    3480

    500

    1950

    800

    9250

    2100

    350

    3200

    3600

    3850

    3580

    500

    2000

    800

    9450

    2150

    350

    3300

    3700

    3950

    3680

    500

    2050

    800

    9650

    2200

    350

    3400

    3800

    4050

    3780

    500

    2100

    800

    9850

    2250

    350

    3500

    3900

    4150

    3880

    500

    2150

    800

    10050

    2300

    350

    3600

    4000

    4250

    3980

    500

    2200

    800

    10250

    2350

    350

    3700

    4100

    4350

    4080

    500

    2250

    800

    10450

    2400

    350

    3800

    4200

    4450

    4180

    500

    2300

    800

    10650

    2450

    350

     

    工作原理:

    Working principle:

    高温闸阀由阀体、闸板、起落架、换向轮、起落传动部分构成。起落传动装置通过换向轮带动闸板向上、向下作起落运动,达到系统管道密闭开通或调节状态。闸板设有导向轨道,使闸板在运动过程中不致偏离或卡阻,通道为开敞式,积灰无法滞留在密封面上,从而不会影响闸板的关闭。

     

    The valve is made up of body, gate, undercarriage, changing direction wheel and landing transmission parts. Landing transmission gear drive the gate moving up and down via changing direction wheel in order to reach the system pipe statement of sealed opening or regulating. There is guiding track on the gate, so the gate will not depart or be obstructed in the course of moving. The channel is opened and ash can not remain on the sealing surface, so the closing of the gate would not be affected.

     

    卷扬提升型高温闸万博体育max网页版注册,通过指令卷扬电机得电,使卷扬机开始工作,卷动钢丝绳从而提升闸板向上运动,反之则向下运动关闭,行程限位开关同步反馈闸板开关到位信号。电动执行器提升型高温闸万博体育max网页版注册,通过微机或上位仪表,输入一个信号时,此信号与位置反馈信号比较,两个信号偏差大于死区时,致使伺服电机转动减速器的输出轴朝减小这一偏差的方向转动,这样就带动卷筒运动,卷动钢丝,提升闸板作运动。推杆提升型高温闸万博体育max网页版注册,通过指令使推杆作往反运动,从而提升闸板作运动,行程开关同步反馈闸板的开关到位信号。风冷式高温闸万博体育max网页版注册,冷却高压风机的风由冷却管进入,在闸板内腔作循环运动,带着热空气由另一端排出,这样不停的循环,致使闸板温度下降,从而增加闸板的工作强度。

     

    The windlass of winding elevating type begins to work after the motor is powered. The steel wire is rolled up to elevate the gate moving upwards; otherwise the gate will move downwards to close. Stroke limiting switch synchronously feeds back signals of gate. The electric actuator elevating type input a signal though microcomputer or up meter, which is compared with position feedback signal. When the warp of the two signals is more than died zone, the output axle of speed reducer will turn in the direction of reducing the warp, which will drive the convolve move and roll the steel wire to elevate the gate. The draw stems elevating type output instruction to drive the draw stem move back and forth and elevate the gate. The stroke switch synchronously feed back signals of the switch. Wind of wind cooling type enter from the cooling pipe of the cooling high pressure wind motor, move circularly in the lumen of gate and then vent from the other end with hot air. The repeating circulation will reduce the temperature of gate and enhance the working intension of the gate.

     

     

    安装及调试:

    Installation and regulation:

    l         传动机构不允许作起吊用,并严禁损伤。

    l         安装前必须清洁阀门内腔,不允许有任何杂物和污垢附着。

    l         法兰连接的阀门安装时,两法兰之间需加密封垫,然后均匀锁紧联接螺栓。

    l         安装完成后必须进行综合性能检查:接通电源开闭阀门,当阀门至“全开”“全闭”位置时,行程控制机构应准确地切断电源,开度指示机构应准确地显示阀门的开启状态。

     

    l          Transmission device can’t be used for hoisting and avoids abrasion.

    l          The body must be cleaned before installed and there is no dirt and sundries clinging to the body.

    l          Add seal cushion between two flanges connection and screw down bolt when installs the valve.

    l          Synthetic performance of the valve must be done after adjust is over: turn on the power and open the valve, the stroke control device should cut down the power exactly when the valve is in the state of full open or full close. The open angle indicating device should display the open state of the valve gate exactly.

     

      

    运输及保管:

    Transportation and protection:

    l         运输时应避免撞击阀门,阀门应处于全闭位置以防在运输中闸板和传动部件损坏。

    l         当阀门水平放置运输时传动装置及传动部位应悬空,以防止传动轴受力过大变形损坏。

    l         传动装置及传动部位应作防潮、防雨处理。

    l         该阀应存放在干燥的室内,不允许露天存放或堆置。长期存放时应使阀门处于关闭状态,各传动部位加润滑油,传动装置作防潮、防尘处理。

    l          Avoid bumping and the valve is in full close in order to avoid damage of disc and driving part.

    l          Transmission device and part can’t be hung up when the valve in horizontal in order to prevent damage of driving axle.

    l          Treatment of dampproof and vainproof should be done to transmission device and part.

    l          The valve should be stored in dry room. It should be in full close state when long stored. Add lubrication to the transmission part and the device should be dampproof and dustproof.

     

    订货须知:

    Information for order:

    l         选用订货时,请参照产品样本注明产品规格、型号、客户选用传动装置代号及技术参数(使用温度、设备工况、介质性质等)。

    l         选用订货时,若未注明客户选用传动装置代号的按我公司基本型配置,其基本型为普通型装置,不带任何有关特殊要求及相关配件。

    l         样本中未列的规格、用于特殊介质或其它特殊要求,请与我公司销售部、技术部联系,可为您另行设计制造。

    l          Please indicate the type, model and technical parameter (using temperature, working condition of equipment and characteristic of medium etc) referring to the product sample when you place an order.

    l          If you don’t indicate actuator code selected by use when you place an order, we will select the basic collocation of our company for you. The basic type is a normal type without any special request and corresponding accessory.

    l          If you have other special demand. Need special medium or the date that is not listed in the table. Please contract with our department of market and technology. We can design and manufacture for you especially.

     

  • 上一条信息:水冷高温闸阀
  • 下一条信息:没有了!
  • 湖北万博全站app官方下载环保成套设备有限公司 版权所有

    备案号: 鄂ICP备14001966号-1

    地址:湖北省荆州市沙市区十号路98号 电话:0716-4302555 传真:0716-4310988