• 公司相册
  • 公司形象
  • 公司活动
  • 产品发货
  • 产品包装
  • 客户来访
  • 车间生产现场
  • 施工安装现场
  • 海外市场
  • 新闻中心
  • 联系我们
  • 咨询留言
  • 溜槽、输送设备类
    快开阀

     

    KKF系列 快开阀

    QUICKLY OPEN VALVE

     

    快开阀广泛用于物料气力输送及风管除尘系统管道上。主要是为观察工况及维护方便而设置的装置,它具有结构简单,操作方便、快捷、密封性好的特点。

    The valve is widely used in the pipe of material pneumatic transportation wind-pipe dust-moving system. it is the ideal device to maintain the valve and observe the working condition, having the features of simple structure, convenient and quick operation and good sealing performance etc. 

     

    性能参数:

    Performance parameter:

       

    Type

    DN100150200250300350400

    工作压力

    Working pressure

    0.01Mpa

    适用温度

    Suitable temperature

    100

     

    外形图:

    Appearance figure:

     QQ图片20150529134936.png

     

    安装及使用注意事项:

    Installation and using notice:

    1. 将快开阀焊接在管道上,焊缝应均匀光滑,不允许存有焊接缺陷。

    2. 开启门铰轴螺栓应控制好,可依据开启要求控制松紧度。

    3. 密封圈为橡胶件,应避免高温状况下使用。

    4. 应定期检查密封件状况,发现损坏应及时更换。

    5. 未列规格或具其它特殊要求的快开阀、检查门、检修人孔等,请与公司销售部或技术部联系,我公司为您另行设计制造。

    1.   The valve should be welded on the pipe. The welding line must be smooth and the welding objection can not exit.

    2.   The bolt of the valve should be controlled and the degree of tightness can be adjusted according to the opening requirement.

    3.   The sealing ring is rubber, which can not be used in high temperature condition.

    4.   Check the sealing part regularly and exchange the sealing part when it is damaged.

    5.   If the specification and the special requirement of quickly open valve, check door and maintenance hole etc are not listed in the table, you can contact with the market or technology department, our company can design and manufacture for especially.

     


  • 上一条信息:双螺旋喂料机
  • 下一条信息:埋刮式输送机
  • 湖北万博全站app官方下载环保成套设备有限公司 版权所有

    备案号: 鄂ICP备14001966号-1

    地址:湖北省荆州市沙市区十号路98号 电话:0716-4302555 传真:0716-4310988